Optiva VTDVR5100 Tytanium DVR series, Installation & User Manual

Page: 110 / 232

VTDVR5100 Digital Video Recorder
110
1. * : Press
▷
button.
2. – or # : Press number 0 button.
Recording Speed/Quality
There are all 4 conditional setup (No Rec/Low/Standard/High/Custom).
Except “Custom”, Setup condition will synchronize “Speed(ips)” and “Quality” automatically, Speed(ips)
and Quality can be set each separately.
Pre Alarm (sec)
It can set max. 5 second.
Post Alarm (sec)
It can set max. 60 seconds.
<Note>
1. In case of set ‘No Rec.’ in Schedule Rec., it records as a set of Pre Alarm. While Schedule
Recording, it records Pre Alarm section in speed(ips) of a set Schedule Rec.
2. When Post Alarm is set to Latched, it maintains user recording continuously till the stop
pressing [REC] button by user.
Alarm Recording Status
It can check ON/OFF of Alarm Recording menu in Schedule Recording setup.
16.1.5.4. Example of use Alarm Recording
16.1.5.4.1. Quick setup of Alarm recording using MD, Sensor
It can set alarm recording easily through MD, Sensor. In case of this setup, it records if the alarm occurs
when same set value of all cameras matched to the channel.
<Setup at Alarm Rec. menu>