Optiva VTDVR5100 Tytanium DVR series, Installation & User Manual

Page: 208 / 232

VTDVR5100 Digital Video Recorder
208
(12) Using [
◀
/
▶
] key select 9600 and press [Enter].
(13) In case of WebGate SPD1800, the value of Parity, Stop, and Data as above picture use as default.
Without any special case, Parity, Stop, Data in most of PTZ use standard value.
(14) When leave Monitor mode, press [Exit] key.
19.3.2. Setup from Camera
During video input from PTZ Camera, it sets as follow.
The following is to set when PTZ Camera inputs to Cam #1.
(1) Move Camera> Cam #1 and press [Enter] key.
(2) Using [
▼
/
▲
] key to move to PTZ Home and press [Enter] key.
Using [
◀
/
▶
] key to selectOn and press [Enter].
PTZ Home / PTZ Idle Time: The menus is to set the camera that support PTZ(Pen/Tilt/Zoom).
When PTZ control, move to preset assigned while PTZ Idle Time.
(3) Move to PTZ Idle Time and press [Enter]. Using [
◀
/
▶
] key assign the working time of PTZ Home.
(4) Move to PTZ Port and press [Enter]. Using [
◀
/
▶
] key selects COM Port that PTZ connected. Select
COM2 RS485 and press [Enter] key.
(5) Move to Address and press [Enter] key. Check Address set to PTZ device.