OPTIMUM
M A S C H I N E N - G E R M A N Y
Delivery, interdepartmental transport, unpacking
Version 1.0 dated 2017-03-13
Page 24
Original operating instructions
RD4
GB
R
D
4_
GB
_3.
fm
precisely the cantilever has been aligned with a possible inclination with the adjusting
screws to the machine base, the smaller the cantilever can turn by itself around the col-
umn, when the clamping lever is released.
Use the adjusting shims in the scope of supply at positions
to
.
Align the machine with the adjusting screws.
2.6.4 Fixing
WARNING!
In order to provide for the necessary stability of the radial drilling machine connect the
machine with its foot to the substructure.
Use the threaded rods supplied. The threaded rods must be bent on their end by 90 degrees,
red hot, to obtain the required anchoring safety in the base. We recommend you use anchor
bolts DIN 529 M16 x 250, so that the enclosed threaded rods do not have to be prepared.
Fix the foot of the radial drilling machine to the substructure with the provided through-
holes.
Img.2-3:
Attachment points on machine foot
1
4
1260
110
1040
40
5/8 - UNC
Ø20
300
16
0
30
0
1
1-4 adjusting screws 5/8 UNC with adjusting shims
2
4
3
64
0
62
5
Adjusting screw
