OPTIMUM
M A S C H I N E N - G E R M A N Y
Delivery, interdepartmental transport, unpacking
Version 1.0 dated 2017-03-13
Page 22
Original operating instructions
RD4
GB
R
D
4_
GB
_3.
fm
2.5
Installation plan
2.6
Set-up and assembly
2.6.1 Installation site requirements
In order to achieve sufficient safety against falls by slipping, the accessible area in the mechani-
cal machining zone of the machine must be equipped with a slip resistance. The slip resistant
mat and/or the slip resistant floor must be at least R11 according to BGR 181. The risk assess-
ment of the machine determines whether or not this is needed.
The used shoes must be suitable for being used in those machining areas. The accessible
areas must be cleaned.
Organise the working area around the machine according to the local safety regulations.
"Space required for the machine“ on page 51
The work area for operation, maintenance and repair must not be restrictive.
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long service life
of the machine, the place of installation should fulfil certain criteria.
