Optimum OPTidrill RD 4 Operating Manual Download Page 75

Page: 75 / 80

OPTIMUM

M A S C H I N E N - G E R M A N Y

Appendix

Version 1.0 dated 2017-03-13

Page 75

Original operating instructions

RD4

_8.

8.3

Storage

ATTENTION!

Incorrect and improper storage might result in damage or destruction of electrical and
mechanical machine components.

Store packed and unpacked parts only under the intended environmental conditions.

Follow the instructions and information on the transport box.

Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for
more than three months or are stored under different environmental conditions than those spec-
ified here.



"Environmental conditions storage and transport“ on page 49.



Fragile goods
(Goods require careful handling)



Protect against moisture and humid environment



"Environmental conditions storage and transport“

on page 49



Prescribed position of the packing case
(Marking the top surface - arrows pointing up)



Maximum stacking height

Example: not stackable - do not stack further pack-
ing case on top of the first one.

Summary of Contents for OPTidrill RD 4

















































































Search results

Summary of Contents for OPTidrill RD 4

Reviews:

Related manuals for OPTidrill RD 4

Brands by name

Popular brands

Optimum OPTidrill RD 4, Operating Manual

Search results

Summary of Contents for OPTidrill RD 4

Reviews:

Related manuals for OPTidrill RD 4

Brands by name

Popular brands