OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0 dated 2017-03-13
Page 8
Original operating instructions
RD4
GB
R
D
4_
GB
_1.
fm
1.3
Intended use
WARNING!
In the event of improper use, the radial drilling machine
will endanger personnel,
will endanger the machine and other material property of the operating company,
the correct function of the radial drilling machine may be affected.
The radial drilling machine is designed and manufactured to be used in a non-explosive envi-
ronment. The radial drilling machine is designed and manufactured for holes in cold metals or
other non flammable materials or that not constitute a health hazard using a rotating filing-strip-
ping tool that has a number of grooves for collecting the filings.
If the radial drilling machine is used in any way other than described above, modified without
authorization of Optimum Maschinen Germany GmbH, then the geared drill is being used
improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that
observe the limits of the radial drilling machine,
the operating manual is observed,
the inspection and maintenance instructions are observed.
"Technical specification“ on page 48
Switching on forbidden!
Only switch when stopped!
Read the operating
instructions before
commissioning!
Pull out the mains plug!
Use ear protection!
Wear protective glasses!
Wear protective gloves!
Wear safety shoes!
Wear a protective suit!
Wear face protection with
protective helmet!
Protect the environment!
Contact address
Oil filler position
Oil outlet
