OPTIMUM
M A S C H I N E N - G E R M A N Y
Delivery, interdepartmental transport, unpacking
Version 1.0 dated 2017-03-13
Page 28
Original operating instructions
RD4
GB
R
D
4_
GB
_3.
fm
WARNING!
There is a danger to persons and equipment, if the first commissioning of the radial
drilling machine is carried out by inexperienced personnel.
We do not assume any liability for damages caused by incorrectly performed
commissioning.
„Qualification of personnel“ auf Seite 10
2.11.1 Warming up the machine
ATTENTION!
If the radial drilling machine and in particular the drilling spindle is immediately operated
at maximum load when it is cold it may result in damages.
If the machine is cold, e.g. directly after having transported the machine, it should be warmed
up at a spindle speed of only 500 1/min for the first 30 minutes.
