LBL-2008-41-v5 OptoMonitor 3 IFU_en Rev 2021-08
53
|
P a g e
6
PATIENT CASE MANAGEMENT
Opening a New Case
Opening a New Case Without DICOM
It is required that patient ID be set up
BEFORE
each case. Until the user manually inputs this
information, the system does not consider a case to be open, and saves any recordings made as
“NoPatient…”. To open a case:
-
Navigate to the Patient Information screen, via the MAIN screen.
-
Enter information for all required fields.
NOTE: Ensure that all information entered is correct in all relevant fields before moving onto next
step. Once a recording is made using a specified patient ID, patient ID CANNOT be changed.
-
Press the green arrow in the bottom right-hand corner of the screen to save patient
information. This “opens” the case under this patient ID.
Return to the MAIN screen. Selecting any of the measurement functions (FFR, dPR, dPR pullback) will
begin a recording that will save under the patient’s ID information.
Case open for Patient:
“Smith, John”, Patient ID:
123456.
Note that patient name
and ID appears in the
information window, and
all recordings saved under
this case “123456” appears
in recordings selection box.