Opex AS7200 User Manual Download Page 27

Page: 27 / 84

Operating the System

AS7200 User Manual - OPEX Corporation

Dual sequence view

The dual sequence view shows 2 thumbnails for each piece, grouped by the
order they were scanned.

Information window

The Information window is in the lower right corner of the Run screen. Select
the tabs in the Information window to display the following:

Each piece is displayed

on two rows, one for

each snippet

The

ENERAL

NFORMATION

tab displays job information such as the start

time and operator name. The General Information will not change
depending on the document.

The

IECE

NFORMATION

tab provides information about the selected

thumbnail. Piece information may include the bin the piece was sorted to,
size dimensions, and page type.

ATCH

NFORMATION

includes data such as the transaction number, pages in

the batch, and the date and time the batch was created, received, and
processed.

The

RINTER

tab (not shown) provides information on the status of the ink

jet audit trail printers. Check the printer tab if audit trails are not printing
correctly.

Summary of Contents for AS7200





















































































Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands

Opex AS7200, User Manual

Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands