Opex AS7200 User Manual Download Page 18

Page: 18 / 84

Operating the System

AS7200 User Manual - OPEX Corporation

Getting Started

Power up the system:

If the AS7200 system is not already up and running, turn on the power:

Turn on the main power switch (see Figure 1).

Press the power button on the UPS. The monitor will turn on and the
computer will begin to boot up.

Log in to Windows with your Windows/network user name and password. If
your AS7200 is not connected to a network, you may not have to log in to
Windows first. Proceed to step 4.

Once the computer has finished booting Windows, it will launch the AS7200
CertainScan application.

Note:

If you mistakenly close CertainScan, double-click the icon on the

desktop to start it again.

Log in to the system:

On the vertical menu bar, select the icon for your user account.

Summary of Contents for AS7200





















































































Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands

Opex AS7200, User Manual

Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands