Opex AS7200 User Manual Download Page 70

Page: 70 / 84

Statistics

AS7200 User Manual - OPEX Corporation use only - not for distribution

Performance Details statistics

The following table list the terms that appear in the Performance Details
section of the statistics report.

Note:

All times noted in the formulas in this table are in seconds. For example,

if the Active Job Time appears as “00:01:49” then that means one minute
(60 seconds) plus 49 seconds, or 109 seconds.

The Rejects section lists the reasons for the rejected documents and how
many documents were rejected for each reason.

Reference
Jam Clear
Time

Estimated time it takes to clear a jam. This number is fixed at
20 seconds.

Table 3: Overall System Performance Measures terms (continued)

Term

Definition

Table 4: Performance Details terms

Term

Definition

Active Job Time

Time the AS7200 was either actively running or was

halted due to a jam. Active Job Time is broken down by:

• R

IME

• J

IME

Run Time

Total run processing time.

Jam Time

Total time the AS7200 was halted for a jam.

Idle Time

Time the Operator was in the Run Job window, but the

AS7200 was not processing pieces.

Table 5: Reasons for rejected items

Length Too Long

Results when an image is longer than the maximum
allowable image size of the system or when outsorting is
set to reject an image longer than a defined length.

Summary of Contents for AS7200





















































































Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands

Opex AS7200, User Manual

Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands