Opex AS7200 User Manual Download Page 46 | Manualshive

Page: 46 / 84

Opex AS7200 User Manual Download Page 46

46

Operating the System

AS7200 User Manual - OPEX Corporation

Note:

View the piece information data on the Run screen to determine if the

image was marked (as VOID in the batch file) or unmarked. From the
batch editor you can decide whether or not to mark the voided images
in the resulting batch file by using the

M

ARK

V

OIDS

button.

Using Batch Editor to fix incomplete batches

If there is a problem with the machine and/or CertainScan does not close
properly during a run, a batch may not be closed and saved properly. If this is
the case, the operator will be notified that a temporary batch file exists when
restarting CertainScan, and that only an operator with a ManagerLevel account
or an OPEX technician can fix the problem.

Consult your AS7200 Administrator if you receive this error message.

IdAssist

The IdAssist Document Tracking System provides an additional method for
identifying and/or taking action on documents. Trigger the IdAssist function
associated with the job by dropping documents in the right front corner of the
conveyor, reducing the wait time associated with using the touchscreen
monitor.

Consult your AS7200 Administrator for more information on how IdAssist
works with your jobs.

The following functions are available as part of IdAssist:

Color

The color select trigger identifies documents that are to be scanned in

color without having to touch the screen. This is very useful in a color select
job, when you need to tell the system which documents to scan in color and
which documents to scan normally.

Dropout

Similar to color select, this allows for you to trigger a specified color

dropout for a document (red, green or blue).

Transaction boundary

Use the transaction boundary trigger instead of the

T

RANSACTION

button on the run screen. The transaction boundary trigger will

start a new transaction with the document that triggers the sensor.

Automatic rotation of document

Tell the system to rotate the resulting

image automatically.

«
...
44
45
46
47
48
...
»

Summary of Contents for AS7200





















































































Reviews:

No comments