Operating the System
31
AS7200 User Manual - OPEX Corporation
Scanning documents
After you have selected a job, you are ready to scan documents. Before you
do, here are a few things to remember:
Removing documents from an envelope
Documents that are tri-folded tend to have the top and bottom sections lifted
up. Prior to dropping any tri-folded documents, flatten the ends, allowing for a
smoother feed.
As documents are dropped onto the conveyor, it’s important to drop them in
such a way as to have the documents fully justify to the side rail prior to
entering the feeder. The conveyor rollers are angled to assist in justifying the
documents to the side rail as they are dropped. Drop the documents far
enough back so that they will have time to straighten. If documents are not fully
justified as they enter the feeder section, skew jams may occur. It should also
be noted that enough space gap should be allotted between documents. At
least ½ inch between documents will provide for proper image capture.
