Opex AS7200 User Manual Download Page 23

Page: 23 / 84

Operating the System

AS7200 User Manual - OPEX Corporation

Run screen buttons

Press

to start the scanner.

The

AGE

YPE

buttons allow the operator to designate the page type

of the next document. The

AGE

YPE

buttons will only be available if

they have been activated for the current job.

OTATE

the image of the selected document. Use the three rotate

buttons to position the image as desired. These buttons will only be
available if activated for the current job.

DJUST

the settings in the Capture Parameters window to enhance

the quality of the output images. See “Adjusting image quality” on
page 40.

Press a

ESCAN

button to replace a previously scanned image with a

new one. See “Rescanning documents” on page 41 for more infor-
mation.

ELETE

a document from the batch. The

ELETE

buttons, if enable in

the current job, are only available when the machine is stopped. See
“Deleting documents from the batch” on page 41.

OID

the selected document or transaction. The

OID

buttons are

only available if activated for the current job. See “Voiding
documents and transactions” on page 42 for more information.

End the current

RANSACTION

. This button will only be available if it

has been activated for the current job.

Start a

ATCH

. This button will only be available if it has been

activated for the current job.

Press the

CTION

button to access the

ESCAN

ATCH

, and

OID

buttons. The

CTION

button only appears if two or more of these

buttons (

ESCAN

ATCH

OID

)

are enabled.

TOP

the machine. This does not end the current batch or transac-

tion.

LOSE

the current batch.

XIT

the current job and close the Run screen.

Summary of Contents for AS7200





















































































Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands

Opex AS7200, User Manual

Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands