Opex AS7200 User Manual Download Page 35

Page: 35 / 84

Operating the System

AS7200 User Manual - OPEX Corporation

The next document scanned (in this example, another check) will start a new

transaction.

Continue to place your documents onto the conveyor. The AS7200 will
scan and sort the documents depending on the current job’s settings.

Note:

Unfold any folded pages so they lay flat on the conveyor. Folded

pages will not be scanned correctly and may jam the system.

Note:

Feed documents with the correct side up. When searching for/reading

MICR lines, OCR lines, and mark boxes, the AS7200 will assume the
documents are being fed face up, with the bottom edge towards you.

As the AS7200 processes documents, check to make sure:

• Documents are being scanned properly.

• All critical information (MICR line, OCR line, etc.) is being collected

properly.

• Documents are being sorted to the correct bin.

Scanning tips

Make use of these techniques for properly handling paper and feeding
documents:

• Make sure documents are unfolded and place them on the conveyor directly

in front of the point of extraction. This will give the machine a chance to

New transaction

Summary of Contents for AS7200





















































































Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands

Opex AS7200, User Manual

Search results

Summary of Contents for AS7200

Reviews:

Related manuals for AS7200

Brands by name

Popular brands