Operating the System
41
AS7200 User Manual - OPEX Corporation
Rescanning documents
If you are not pleased with a particular image, you can rescan the document
while the job is running. To rescan a document:
1
Select the document’s thumbnail.
2
Take the document out of the sort bin.
3
Press
R
ESCAN
to replace the document in the batch.
Note:
If an audit trail was printed on the document the first time it was
scanned, press
R
ESCAN
NP
(no printing) to replace the document in the
batch. This way, no additional audit trails will be printed on the
document.
4
Drop the document onto the drop feeder.
5
Verify that the image is acceptable.
Note:
The
R
ESCAN
buttons will only be available if activated for the current job.
Deleting documents from the batch
When the machine is stopped, you can delete documents from the batch.
Press the
D
ELETE
button to delete a document image.
Note:
The
D
ELETE
button will only be present if activated for the current job.
The action of the
D
ELETE
button depends on the setting of the
A
LLOW
D
ELETE
job
parameter:
• If the parameter is set to
D
ELETE
L
AST
I
TEM
, you will only be able to delete the
most recently scanned document image from the batch. Press
D
ELETE
to
delete the last image.
• If the
A
LLOW
D
ELETE
parameter is set to
D
ELETE
T
O
E
ND
O
F
B
ATCH
, you can also
choose a document thumbnail and delete all the documents scanned after
the selected document. When the
D
ELETE
button is pressed, the Confirm
