Opengear ACM5000 User Manual Download Page 284

Page: 284 / 335

Chapter 16:

KCS Client Configuration

284

Console Server & RIM Gateway User Manual

15.5.4

/etc/config/snmpd.conf

The

net-snmpd

is an extensible SNMP which includes built-in support for a wide range of MIB information modules, and

can be extended using dynamically loaded modules, external scripts and commands.

snmpd

when enabled should run

with a default configuration. Its behavior can be customized via the options in

/etc/config/snmpd.conf. Note that if the

SNMP Service is enabled through the Web Based Management Console this configuration file will be overidden and you
will lose any customization.

Changing standard system information such as system contact, name and location can be achieved by editing

/etc/config/snmpd.conf

file and locating the following lines:

sysdescr

"opengear"

syscontact

root <

root@localhost

>(configure /etc/default/snmpd.conf)

sysname

Not defined (edit /etc/default/snmpd.conf)

syslocation

Not defined (edit /etc/default/snmpd.conf)

Simply change the values of

sysdescr, syscontact, sysname

and

syslocation

to the desired settings and restart

snmpd

The

snmpd.conf

provides is extremely powerful and too flexible to completely cover here. The configuration file itself is

commented extensively and good documentation is available at the

net-snmp

website http://www.net-snmp.org,

specifically:

Man Page:

http://www.net-snmp.org/docs/man/snmpd.conf.html

FAQ:

http://www.net-snmp.org/docs/FAQ.html

Net-SNMPD Tutorial:

http://www.net-snmp.org/tutorial/tutorial-5/demon/snmpd.html

Summary of Contents for ACM5000
















































































































































































































































































































































Search results

Summary of Contents for ACM5000

Reviews:

Related manuals for ACM5000

Brands by name

Popular brands

Opengear ACM5000, User Manual

Search results

Summary of Contents for ACM5000

Reviews:

Related manuals for ACM5000

Brands by name

Popular brands