Opengear ACM5000, User Manual

Page: 114 / 335

Chapter 5: Firewall, Failover and Out of Band
114
Console Server & RIM Gateway User Manual

Click on the Disabled link next to DHCP Server which will bring up the System: DHCP Server page

Check Enable DHCP Server

To configure the DHCP server, tick the Use interface address as gateway check box

Set the DNS server address(es) to be the same as used on the external network i.e. if the console server is acting
as an internet gateway or a cellular router, then use the ISP provided DNS server address

Enter the Default Lease time and Maximum Lease time in seconds. The lease time is the time that a
dynamically assigned IP address is valid before the client must request it again

Click Apply
The DHCP server will sequentially issue IP addresses from a specified address pool(s):

Click Add in the Dynamic Address Allocation Pools field

Enter the DHCP Pool Start Address and End Address and click Apply