User Manual
Advanced Console Server & RIM Gateway User Manual
65
Select the
Accessible Port(s)
that the new rule is to be applied to
Then enter the
Network Address
of the subnet to be permitted access
Then specify the range of addresses that are to be permitted by entering a
Network Mask
for that permitted IP
range
e.g.
To permit all the users located with a particular Class C network (204.15.5.0 say) connection to the nominated
port then you would add the following Trusted Network New Rule:
Network IP Address
204.15.5.0
Subnet Mask
255.255.255.0
If you want to permit only the one users who is located at a specific IP address (204.15.5.13 say) to connect:
Network IP Address
204.15.5.0
Subnet Mask
255.255.255.255
If however you want to allow all the users operating from within a specific range of IP addresses (say any of
the thirty addresses from 204.15.5.129 to 204.15.5.158) to be permitted connection to the nominated port:
Host /Subnet Address
204.15.5.128
Subnet Mask
255.255.255.224
Click
Apply
Note
The above Trusted Networks will limit access by
Users
and
Administrators
to the console serial ports. However
they do not restrict access by the
Administrator
to the
console server
itself or to attached hosts. To change the
default settings for this access, you will to need to edit the
IPtables
rules as described in the
Chapter 14 -
Advanced.
4.6
Serial Port Cascading
Cascaded Ports enables you to cluster distributed
console servers
so a large number of serial ports (up to 1000) can be
configured and accessed through one IP address and managed through the one Management Console. One
console
server
, the Master, controls other
console servers
as Slave units and all the serial ports on the Slave units appear as if
they are part of the Master.
Opengear’s clustering connects each Slave to the Master with an SSH connection. This is done using public key
authentication so the Master can access each Slave using the SSH key pair (rather than using passwords). This ensures
Summary of Contents for ACM5000
