Online USV ONLINE XANTO S 1000, User Manual

Page: 125 / 222

M A I N T E N A N C E
125 / 222
XS700-XS3000_manual_ger_eng_it_V1.1.2.doc
...........................................................
R. Kistler
4. Carefully pull out the battery module insert by the grip and
slide the batteries onto a level, stable support. Support the
batteries with both hands.
NOTE
Check whether the replacement batteries have the same
specifications as the old batteries.
5. Replace the batteries in the battery module insert. Please read
the " Disposing of old batteries or the UPS system " section for
information on proper disposal.
6. Insert the battery module insert with the new batteries into the
housing. This requires some effort.
7. Insert the battery cover again on the left side and make sure
that it engages correctly. Run the connection cable again
through the access slot on the cover. The screws that were
placed aside can now be reinserted.
CAUTION
A small spark can occur when the batteries are connected to
the UPS system. This is normal and does not pose a hazard
to people. Quickly and firmly insert the cable of the batteries
into the battery plug connection of the UPS system.
8. The internal battery plug connection must be reconnected.
Connect red with red and black with black. Press both parts
together firmly to ensure a proper connection.
9. Secure the plug connection again to the holder and insert the
screws that were placed to the side.
10. Reinsert the front cover of the UPS system.
When reinserting the cover, check to make sure that the
ribbon cable is protected. If this is the case, insert the clips
on the rear side of the cover into the housing and press firmly
until the cover engages.
11. Proceed with section Testing the new batteries .