Specify the distance between each speaker and the listening position.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Surround Right
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
Back Right
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Back Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Surround Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
Subwoofer
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Default values vary depending on the regions.
The speaker "Distance" may be unable to be changed depending on the
settings in "Configuration" "Speaker Channels" / "Subwoofer".
Level Calibration
Adjust the level of each speaker with the builtin test tone. Settings are
automatically configured if you use the Automatic Speaker Setup.
Front Left
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
Summary of Contents for TX-NR545
