Onkyo TX-NR545, Manual

Page: 195 / 298

industry group's objective is to address the industry's requirements for
a digital connectivity specification for high­performance PC and digital
displays.
Caution:
There are some content that can be played only with HDCP Rev. 2.2
compatible devices. To play such content, connect an HDCP Rev.2.2
compatible TV or player to the HDMI OUT jack or HDMI IN1 to 3 jacks of
the unit.
The HDMI video stream (i.e., video signal) is compatible with DVI (Digital
Visual Interface), so TVs and displays with a DVI input can be connected
by using an HDMI­to­DVI adapter cable. (Note that DVI connections only
carry video, so you will need to make a separate connection for audio.)
However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not supported.
The HDMI audio signal (sampling rate, bit length, etc.) may be restricted
by the connected source component. If the picture is poor or there is no
sound from a component connected via HDMI, check its setup. Refer to
the connected component’s instruction manual for details.