Onkyo TX-NR545, Manual

Page: 89 / 298

4. Source
Make settings for input sources, such as volume difference adjustments for
each input selector for the connected equipment. Select the input selector to
configure.
IntelliVolume
IntelliVolume
Default Value: 0 dB
Adjust the volume level difference between the devices connected to
the unit. Select a value between "­12 dB" and "+12 dB". Set a negative
value if the volume of the target device is larger than the others and a
positive value if smaller. When you select a desired input to check the
audio, start playback of the connected device.
This function is not effective in Zone 2.
Name Edit
Set an easy name to each input. The set name will be shown on the main
unit display. Select the input selector to configure.
Name
Default Value: Input name
1. Select a character or symbol with the cursors and press ENTER.
Repeat it to input 10 or less characters.
"A/a": Switches between upper and lower cases. (Pr10 on
the remote controller also toggles between upper and lower cases.)
"←" "→": Moves the cursor to the arrow direction.
" ": Removes a character on the left of the cursor.
"Space": Puts a space.
Pressing CLR on the remote controller will remove all the input
characters.
2. After inputting, select "OK" with the cursors and press ENTER.
The input name will be saved.
To name a preset radio station, press TUNER on the remote controller,
Advanced Settings (Setup Menu)