![background image](http://html.mh-extra.com/html/omron/zx2-ld100/zx2-ld100_user-manual_1633410081.webp)
Smart Tuning
81
ZX2 User’s Manual
INTRODUCTION
BASIC
SETUP
PREPARATION
FOR
MEASUREMENT
TROUBLE-
SHOOTING
INDEX
CONTENTS
SETTING
TRANSITION
CHARTS
FLOW OF
OPERATION
MAIN
APPLICATIONS
& SETTING
METHODS
DETAILED
SETTINGS
SPECIFI-
CATIONS
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
3
Smart tuning
Select from one of the following three methods to execute smart tuning:
(1) Tuning of a single stationary workpiece: Single smart tuning
(2) Tuning of multiple stationary workpieces: Multi-smart tuning
(a mix of workpieces having different color and state)
(3) Tuning of workpieces having different surface states: Active smart tuning
(execution of tuning while workpieces are moving)
(1) Tuning of a single stationary workpiece: Single smart tuning
Select the
desired value.
Press the button to select the
response time.
Select the response time to
match the size and moving
speed of the sensing object.
to
60 µs, 120 µs, 240 µs, 500 µs,
1 ms, 2 ms, 4 ms, 8 ms, 12 ms,
20 ms, 36 ms, 66 ms, 128 ms,
250 ms, 500 ms
Press the
button to apply
the setting.
* After the response time is
changed, the smart tuning
results are cleared, so be
sure to re-execute tuning.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
—
—
Set the reference workpiece in
place.
Press the
button for one
second. When
/
is displayed, release
your finger from the button to
start execution of smart tuning.
If "
" flashes on the
sub-display for three
seconds, it indicates that
tuning was not possible.
Change the response time
setting to a larger value, and
try again.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press to select
Required
Hold down for
1 second
Flashing
Pressing down
Pressed down