Timer
115
ZX2 User’s Manual
INTRODUCTION
BASIC
SETUP
PREPARATION
FOR
MEASUREMENT
TROUBLE-
SHOOTING
INDEX
CONTENTS
SETTING
TRANSITION
CHARTS
FLOW OF
OPERATION
MAIN
APPLICATIONS
& SETTING
METHODS
DETAILED
SETTINGS
SPECIFI-
CATIONS
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
3
Return to RUN mode
Press the
button to move
the digit, press the button to
change the numeric value, and
set the time set to the timer.
to
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
Press the
button to apply
the setting.
Selection menu
Details
(ON-delay timer)
After the measurement result has been finalized, the timer delays
turning ON of the PASS output for the time set to the timer.
(OFF-delay timer)
After the measurement result has been
finalized
, the timer delays
turning OFF of the PASS output for the time set to the timer.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
RUN mode.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press to set.
[Change numeric value]
[Move digit]
ON
OFF
Measured value
HIGH threshold
LOW threshold
HIGH output
PASS output
LOW output
:Time set to timer
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Measured value
HIGH threshold
LOW threshold
HIGH output
PASS output
LOW output
:Time set to timer
Hold down for
3 seconds
Out