1-5
Section 1
Connections and Settings of External Devices
ZS Series
CompoWay/F Communication Command Reference
Section 1
About Com
m
unication Commands
■
Setting of controllers
Set the communications specifications with external devices. ZS Series controllers
have three operating modes; RUN, TEACH and FUN. Set communications
specifications with external devices in FUN mode.
1.
Set the mode switch to FUN.
To switch the operating mode, use the Mode Switch.
H
LD ON ZERO ENABLE
P
L
TEACH
RUN
FUN
2.
Press the RIGHT key to switch the LCD screen and select [SYSTEM].
3.
Press the RIGHT key to switch the LCD screen and select [COM].
4.
Select [RS-232C] to set communications specifications.
Use the same communication specifications for the controller and the
external device.
Setting
Range
LENGTH
8BIT or 7BIT (default value: 8BIT)
PARITY
NON, OFF, EVEN (default value: NON)
STOP
1BIT or 2BIT (default value: 1BIT)
BAUDRAT
9600, 19200, 38400, 57600, 115200 (default value: 38400)