52
Clearing Errors
Section 3-9
3-9
Clearing Errors
If an error occurs, use the following procedure to clear the error and
then remove the cause of the error.
The ZEN must be connected and online for this operation.
1,2,3...
1.
Select
ZEN(Z)/Error Clear
from the Menu Bar to clear the error.
2.
Repeat this step to clear multiple errors.
Note
a)
Refer to
Section 6 Troubleshooting
in the
ZEN Operation
Manual (Z183)
for information on ZEN errors.
b)
ZEN errors that occur while online will be displayed in the
Status Bar.
Error display
Z184-E1-04.book Page 52 Thursday, November 20, 2008 4:25 PM