22
Inputting Ladder Programs
Section 2-2
Note a) Horizontal connection lines can be drawn by using the
mouse or Cursor Keys to move to the connection line
position and then use any of the following methods.
• Pressing the
−
Key.
• Click the
Insert/Horizontal
Button on the Toolbar.
• Select
Insert(I)/Horizontal(H)
from the Menu Bar.
b) Vertical connection lines can also be drawn by using the
mouse or Cursor Keys to move to the connection line
position and then use any of the following methods:
• Press the
|
Key.
• Click the
Insert Vertical
Button on the Toolbar.
• Select
Insert(I)/Vertical(V)
from the Menu Bar. The
vertical line will be drawn down from the cursor
position.
12. The ladder program has now been completed.
13. Double-click in the rung comment area to write rung comments
for the ladder program. It is also possible to write comments by
first using either the mouse or the cursor keys to move to the rung
comment area, and then selecting
Edit(E)/Edit rung comments
.
Z184-E1-04.book Page 22 Thursday, November 20, 2008 4:25 PM
