![background image](http://html1.mh-extra.com/html/omron/zen-soft01-v4-12-2008/zen-soft01-v4-12-2008_operation-manual_744252063.webp)
45
Transferring Programs to the ZEN
Section 3-3
Note
a)
Ladder programs cannot be edited when online. Always go
offline before creating or editing ladder programs.
b)
Select
ZEN/ZEN Information(S)
from the Menu Bar while
online to obtain information about the connected ZEN.
3-3
Transferring Programs to the ZEN
This section describes how to transfer ladder programs created using
the ZEN Support Software to the ZEN.
The ZEN must be connected and online and the project file opened
before the program transfer operation can be executed.
Precaution
Perform adequate safety checks before transferring the program to
the ZEN.
1,2,3...
1.
Click the
Transfer to ZEN
Button on the Toolbar or select
ZEN(Z)/
Transfer(R)/Transfer to ZEN(T)
from the Menu Bar. The Transfer
to ZEN Dialog Box will be displayed. Click the
OK
Button to
transfer the program to the ZEN. Click the
Cancel
Button to
cancel the transfer.
Settings Details
• Select
The settings are downloaded too
in the Transfer to ZEN
Dialog Box to download the ZEN settings in the ZEN Support
Software at the same time.
Refer to
4-1 ZEN Settings
for information on the various ZEN
settings.
• Select
Protection is set
in the Transfer to ZEN Dialog Box if the
ZEN is to be protected by the password set in the ZEN Support
Software. Do not select this option if no password has been set.
Refer to
4-2 Setting a Password
for information on setting
passwords.
Note
1.
With version 4.0 or higher, it is possible to transfer programs to the
ZEN even if the Expansion I/O Units are not connected, so long
Z184-E1-04.book Page 45 Thursday, November 20, 2008 4:25 PM