Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual Download Page 11 | Manualshive

Page: 11 / 95

background image

xi

About this Manual

This manual describes the installation and operation of the ZEN-SOFT01 ZEN
Support Software and includes the sections described below.

Please read this manual carefully and be sure you understand the information
provided before attempting to install or operate the ZEN Support Software. Be
sure to read the precautions provided in the following section.

Precautions

provide general precautions for using the ZEN Support Software

and related devices.

Section 1

describes how to install and start the ZEN Support Software. The

screen configuration is also explained, along with the submenus for the Menu
Bar, Toolbar, and Status Bar.

Section 2

describes how to create, save, edit, and print ladder programs.

Section 3

describes how to connect to the ZEN and how to transfer programs

between the ZEN and the ZEN Support Software.

Section 4

describes the ZEN system settings, how to set passwords to protect

the ZEN ladder programs, and how to clear the ZEN memory.

Section 5

describes the simulation function, which can be used to simulate

ladder program execution without downloading the program to the ZEN.

Section 6

describes errors that may occur while using the ZEN Support

Software and possible countermeasures.

The following two manuals are provided for the ZEN Programmable Relays.
Refer to them as required in operation.

Note

On the ZEN Support Software displays, bits in ZEN memory are
called “relays,” program input bits are called “contacts,” and
program output bits are called “coils.”

Manual

Contents

Cat. No.

ZEN Programmable
Relays Operation
Manual

The ZEN specifications,
functions, and operating
methods.

V1 or Pre-V1
CPU Units

Z183

V2 CPU Units

Z211

ZEN Programmable
Relays Communications
Manual

The ZEN-10C4
communications functions
and operation.

Z212

ZEN Support Software
Operation Manual

Installation and operating
procedures for the ZEN
Support Software

Z184

!WARNING

Failure to read and understand the information provided in this manual may
result in personal injury or death, damage to the product, or product failure.
Please read each section in its entirety and be sure you understand the
information provided in the section and related sections before attempting
any of the procedures or operations given.

Z184-E1-04.book Page xi Thursday, November 20, 2008 4:25 PM

«
...
9
10
11
12
13
...
»

Summary of Contents for ZEN-SOFT01-V4 - 12-2008
































































































Reviews:

No comments

Related manuals for ZEN-SOFT01-V4 - 12-2008

FIREWORKS 2-USING FIREWORKS

Brand: MACROMEDIA Pages: 20

CONTRIBUTE 3-CONTRIBUTE PUBLISHING SERVER

Brand: MACROMEDIA Pages: 30

Configuring Arrays

Brand: HP Pages: 132

Brand: HP Pages: 26

Brand: HP Pages: 35

460C - Deskjet Color Inkjet Printer

Brand: HP Pages: 24

Brand: HP Pages: 201

BB118BV - StorageWorks Data Protector Express Package

Brand: HP Pages: 365

BB118BV - StorageWorks Data Protector Express Package

Brand: HP Pages: 35

2605dtn - Color LaserJet Laser Printer

Brand: HP Pages: 372

e-diagtools 4.0

Brand: HP Pages: 74

Sun GlassFish EnterpriseServer v3 Prelude

Brand: Sun Microsystems Pages: 48

Sun StorEdge Availability Suite 3.2

Brand: Sun Microsystems Pages: 52

Brand: Cpanel Pages: 221

BACKUP AND RECOVERY 10 SERVER FOR LINUX -

Brand: ACRONIS Pages: 14

Backup & Recovery 10 Advanced Editions

Brand: ACRONIS Pages: 10

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands