7
．
EtherNet/IP Connection Procedure
28
4
Use the following way to make
the gateway signal mapping to
transfer data from Port X3 to
Port X2.
Drag
Input_0001
of Port X3 and
drop it onto ~
2 InBytes.BYTE_
0001
of Port X2.
In the
Mapped Signals
Field at
the bottom of the pane, check
that
Input_0001
of Port X3 is
mapped to
~2 InBytes.BYTE
_0001
of Port X2.
5
In the same way as step 4, map
Input_0002
of Port X3 to
~2
InBytes.BYTE_0002
of Port X2.
6
Use the following way to make
the gateway signal mapping to
transfer data from Port X2 to
Port X3.
Drag
~2 OutBytes.BYTE_0001
of Port X2 and drop it onto
Output_0001
of Port X3.
Likewise, Drag
~2 OutBytes.
BYTE_0002
of Port X2 and drop
it onto
Output_0002
of Port X3.
7
In the
Mapped Signals
Field,
check that 2-byte data is
mapped in each direction
between Port X3 and Port X2.
Click
OK
.
Drag & drop
Drag & drop
Summary of Contents for sysmac EtherNet/IP NJ Series
Page 68: ...2018 0718 0718 P708 E1 01 ...