Omron SYSMAC CPM1, Operation Manual, Page: 27 / 142

16
2-1 Specifications
2-1-1 General Specifications
Item CPM1-10CDR-
j
CPM1-20CDR-
j
CPM1-30CDR-
j
CPM1-30CDR-
j
-V1
(see note 2)
Supply voltage
AC type 100 to 240 VAC, 50/60 Hz
DC type 24 VDC
Operating voltage range AC type 85 to 264 VAC
DC type 20.4 to 26.4 VDC
Power consumption AC type 60 VA max.
DC type 20 W max.
Inrush current 60 A max.
External power supply Supply voltage 24 VDC
(AC type only)
Output capacity 300 mA (see note)
Insulation resistance 20 M
Ω
min. (at 500 VDC) between the external AC terminals and
protective earth terminals
Dielectric strength 2,300 VAC 50/60 Hz for 1 min between the external AC and protective
earth terminals, leakage current: 10 mA max.
Noise immunity 1,500 Vp-p, pulse width: 0.1 to 1
µ
s, rise time: 1 ns (via noise simulation)
Vibration resistance 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
2
(1G) in X, Y, and Z directions for 80 minutes each
(Time coefficient; 8 minutes
×
coefficient factor 10 = total time 80 minutes)
Shock resistance 147 m/s
2
(15G) three times each in X, Y, and Z directions
Ambient temperature Operating: 0
°
to 55
°
C
Storage: –20
°
to 75
°
C
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gas
Terminal screw size M3
Grounding Less than 100
W
Power interrupt time AC type: 10 ms min.
DC type: 2 ms min.
(A power interruption occurs if power falls below 85% of the rated voltage
for longer than the power interrupt time.)
CPU Unit weight
AC type 600 g max. 800 g max. 900 g max.
DC type 500 g max. 700 g max. 800 g max.
Expansion I/O Unit weight 600 g max.
Note 1. When the external power supply provides an excessive current or is short
circuited, the external power supply voltage drops. The PC will, however,
continue to operate.
2. CPM1-30CDR-
j
-V1 will be available soon.
Specifications
Section 2-1