Omron NX-ILM400, User Manual

Page: 169 / 176

A - 43
Appendices
NX-series IO-Link Master Unit User’s Manual (W567)
A-6 V
ersion
Informa
tion
with C
o
m
m
un
icati
ons
Cou
p
ler Un
it
s
A
A-6-2 Connection to an
EtherNet/IP Co
upler Unit
 When Using a CS/CJ/CP-series PLC
The items that are used in the version corresponding table for functions are given below.
The version corresponding table for functions is as follows.
• You can also use the added or changed functions with the unit versions/versions given in the table
or with later/higher versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do
not have the corresponding versions given in the table. If a Unit does not have the specified ver-
sion, support is provided by the oldest available version after the specified version. Refer to the
user's manuals for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in the user’s manual for the Communications Coupler Unit,
and CPU Unit.
Function
Change or
addition
NX Unit Corresponding unit version/version
Model Unit version
EtherNet/IP
Coupler Unit
Sysmac Stu-
dio
NX-IO Config-
urator
CX-Configura-
torFDT
Func-
tions of
NX Units. Indicates
whether the
function was
newly added
or changed. Model
num-
bers of
NX
Units. Unit versions
of the NX
Units that are
compatible
with the func-
tion. Unit versions
of EtherNet/IP
Coupler Units
that are com-
patible with the
NX Units with
the function. Sysmac Stu-
dio versions
that are com-
patible with the
NX Units and
EtherNet/IP
Units. NX-IO Config-
urator ver-
sions that are
compatible
with the NX
Units and Eth-
erNet/IP Cou-
pler Units.
The version of
the CX-Config-
uratorFDT that
supports the
IO-Link Master
Unit.
Function
Change
or addi-
tion
NX Unit
Corresponding unit version/version
*1
*1. Refer to the user's manual of the EtherNet/IP Coupler Unit for the unit versions of CPU Units and EtherNet/IP Units cor-
responding to EtherNet/IP Coupler Units.
Model Unit version
EtherNet/IP
Coupler
Unit
Sysmac
Studio
NX-IO Con-
figurator
*2
*2. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the
peripheral USB port on the EtherNet/IP Coupler Unit. You cannot connect by any other path. If you need to connect by
another path, use an EtherNet/IP Coupler Unit with unit version 1.2 or later.
CX-Config-
uratorFDT
Initial I/O alloca-
tion value
*3
*3. The following I/O allocations are enabled by default.
Digital Input Data
Digital Output Data
Change NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.20 Ver.1.01
Ver.2.2
*4
*4. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, connection is supported only for a connection to the
peripheral USB port on the EtherNet/IP Coupler Unit. You cannot connect by any other path. If you need to connect by
another path, use an EtherNet/IP Coupler Unit with unit version 1.2 or later and CX-ConfiguratorFDT with version 2.4 or
higher.
Digital input col-
lection Addition NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.20 Ver.1.01
Ver.2.2
*4
Addition of NX
objects
*5
*5. The following objects are added.
Vendor Name of the Last Connected IO-Link Device
Product Name of the Last Connected IO-Link Device
Vendor Name
Product Name
Addition NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.20 Ver.1.01
Ver.2.2
*4