Omron NX-ILM400, User Manual

Page: 168 / 176

Appendices
A - 42 NX-series IO-Link Master Unit User’s Manual (W567)
 When Using an NJ/NX/NY-series Controller
The items that are used in the version corresponding table for functions are given below.
The version corresponding table for functions is as follows.
• You can also use the added or changed functions with the unit versions/versions given in the table
or with later/higher versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do
not have the corresponding versions given in the table. If a Unit does not have the specified ver-
sion, support is provided by the oldest available version after the specified version. Refer to the
user's manuals for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in the user’s manual for the Communications Coupler Unit,
CPU Unit, and Industrial PC.
Function
Change or
addition
NX Unit Corresponding unit version/version
Model Unit version
EtherNet/IP
Coupler Unit
CPU Unit or
Industrial PC
Sysmac Stu-
dio
CX-Configura-
torFDT
Func-
tions of
NX Units. Indicates
whether the
function was
newly added
or changed. Model
num-
bers of
NX
Units. Unit versions
of the NX
Units that are
compatible
with the func-
tion. Unit versions
of EtherNet/IP
Coupler Units
that are com-
patible with the
NX Units with
the function. Unit versions
of the
NJ/NX-series
CPU Units or
NY-series
Industrial PCs
that support
the NX Units. Sysmac Stu-
dio versions
that are com-
patible with the
NX Units, Eth-
erNet/IP Cou-
pler Units,
CPU Units,
and Industrial
PCs.
The version of
the CX-Config-
uratorFDT that
supports the
IO-Link Master
Unit.
Function
Change
or addi-
tion
NX Unit
Corresponding unit version/version
*1
*1. Refer to the user's manual of the EtherNet/IP Coupler Unit for the unit versions of EtherNet/IP Units corresponding to Eth-
erNet/IP Coupler Units.
Model Unit version
Ether-
Net/IP Cou-
pler Unit
CPU Unit or
Industrial
PC
Sysmac
Studio
CX-Config-
uratorFDT
Initial I/O alloca-
tion value
*2
*2. The following I/O allocations are enabled by default.
Digital Input Data
Digital Output Data
Change NX-ILM400 Ver.1.1 Ver.1.2 Ver.1.14 Ver.1.20
Ver.2.4
*3
*3. The CX-ConfiguratorFDT with version 2.2 or higher can be used if it is connected to the peripheral USB port on the Eth-
erNet/IP Coupler Unit.
Digital input col-
lection Addition NX-ILM400 Ver.1.1 Ver.1.2 Ver.1.14 Ver.1.20
Ver.2.4
*3
Addition of NX
objects
*4
*4. The following objects are added.
Vendor Name of the Last Connected IO-Link Device
Product Name of the Last Connected IO-Link Device
Vendor Name
Product Name
Addition NX-ILM400 Ver.1.1 Ver.1.2 Ver.1.14 Ver.1.20
Ver.2.4
*3