8 Inspection and Maintenance
8 - 2
NX-series IO-Link Master Unit User’s Manual (W567)
8-1
Cleaning and Inspection
This section describes daily device maintenance such as cleaning and inspection.
Make sure to perform daily or periodic inspections in order to maintain the IO-Link Master Unit's
functions in the best operating condition.
Clean the IO-Link Master Unit regularly as described below in order to keep it in optimal operating
condition.
• Wipe the equipment over with a soft, dry cloth when performing daily cleaning.
• If dirt remains even after wiping with a soft, dry cloth, wipe with a cloth that has been wet with a suffi-
ciently diluted detergent (2%) and wrung dry.
• Units will become stained if items such as rubber, vinyl products, or adhesive tape are left on the NX
Unit for a long period. Remove such items during regular cleaning.
Precautions for Correct Use
• Never use benzene, thinners, other volatile solvents, or chemical cloths.
• Do not touch the NX bus connectors.
Elements in the NX-series IO-Link Master Unit can deteriorate under improper environmental condi-
tions. Periodic inspections are thus required to ensure that the required conditions are being kept.
Inspection is recommended at least once every six months to a year, but more frequent inspections
may be necessary depending on the severe environments.
Take immediate steps to correct the situation if any of the conditions in the following table are not met.
8-1-1
Cleaning
8-1-2
Periodic Inspection
Summary of Contents for NX-ILM400
