Omron NX-ILM400, User Manual

Page: 165 / 176

A - 39
Appendices
NX-series IO-Link Master Unit User’s Manual (W567)
A-6 V
ersion
Informa
tion
with C
o
m
m
un
icati
ons
Cou
p
ler Un
it
s
A
A-6-
1 Connection to an Ether
CA
T
Coupler Un
it
The following table shows the relationships between the unit versions/versions of the NX Units, Com-
munications Coupler Units, CPU Units, Industrial PCs, Sysmac Studio, and CX-ConfiguratorFDT for
changes in or additions to the functions.
The items that are used in the version corresponding table for functions are given below.
The version corresponding table for functions is as follows.
• You can also use the added or changed functions with the unit versions/versions given in the table or
with later/higher versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version, sup-
port is provided by the oldest available version after the specified version. Refer to the user's manu-
als for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in the user’s manual for the Communications Coupler Unit,
CPU Unit, and Industrial PC.
Functions That Were Added or Changed for Each Unit Version
Function
Change or
addition
NX Unit Corresponding unit version/version
Model Unit version
EtherCAT
Coupler Unit
CPU Unit or
Industrial PC
Sysmac Stu-
dio
CX-Configura-
torFDT
Func-
tions of
NX Units. Indicates
whether the
function was
newly added
or changed. Model
num-
bers of
NX
Units. Unit versions
of the NX
Units that are
compatible
with the func-
tion. Unit versions
of EtherCAT
Coupler Units
that are com-
patible with the
NX Units with
the function. Unit versions
of the
NJ/NX-series
CPU Units or
NY-series
Industrial PCs
that support
the Ether- CAT
Coupler Units. Sysmac Stu-
dio versions
that are com-
patible with the
NX Units, Eth-
erCAT Cou-
pler Units and
CPU Units. The version of
the CX-Config-
uratorFDT that
supports the
IO-Link Master
Unit.
Function
Change
or addi-
tion
NX Unit Corresponding unit version/version
Model Unit version
EtherCAT
Coupler
Unit
CPU Unit or
Industrial
PC
Sysmac
Studio
CX-Config-
uratorFDT
Initial I/O alloca-
tion value
*1
*1. The following I/O allocations are enabled by default.
Digital Input Data
Digital Output Data
Change NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.12 Ver.1.20 Ver.2.2
Digital input col-
lection Addition NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.12 Ver.1.20 Ver.2.2
Addition of NX
objects
*2
*2. The following objects are added.
Vendor Name of the Last Connected IO-Link Device
Product Name of the Last Connected IO-Link Device
Vendor Name
Product Name
Addition NX-ILM400 Ver.1.1 Ver.1.0 Ver.1.12 Ver.1.20 Ver.2.2