![background image](http://html1.mh-extra.com/html/omron/nsh5/nsh5_operation-manual_744522094.webp)
70
General Specifications
Appendix A
Display Specifications
Note
(1) PTs with lot numbers 05X0 and earlier have the following specification for colors (because they have
STN LCDs): 256 (bit maps: 4,096). Refer to
NSH5-series PT Lot Numbers
on page 73 for informa-
tion on lot numbers.
(2) This is the estimated time until brightness is reduced by half at room temperature and humidity. It is
only a reference value. The service life will be drastically shortened if the PT is used at low temper-
atures. For example, using the PT at 0
°
C will reduce the service life to approximately 10,000 hours
(reference value).
(3) The brightness cannot be greatly adjusted.
(4) This function does not detect the end of service life. It detects when the backlight is not lit due to a
disconnection or other error. Backlight error detection indicates that all backlights are OFF.
(5) Contact your nearest OMRON representative to replace the backlight.
(6) There may be some defective pixels in the display. This is not a fault as long as the numbers of de-
fective light and dark pixels fall within the following standard range.
Item
Specifications
Display panel
Display device
Color TFT LCD (with backlight) (See note 1.)
Number of dots
320 horizontal
×
240 vertical dots
Display colors
256 colors (32,768 colors for BMP/JPG images) (See note 1.)
Effective display area
115.18 horizontal mm
×
86.38 mm vertical (5.7 inches)
View angle
Left/right
±
70
°
; down 50
°
; up 70
°
Backlight
(See note 5.)
Service life
75,000 hours min. (See note 2.)
User replacement
Not possible.
Brightness adjustment
There are three levels of adjustment by operating the touch panel.
(See note 3.)
Automatic backlight-OFF
function
Screen-saver function: 1 to 255 min, in units of 1 min, turned
ON/OFF by system memory operation.
Backlight error detection
Error is detected automatically at startup, and the RUN indicator
flashes green as notification. (See note 4.)
Front-panel indicator RUN
Lit green: PT is operating normally.
Flashing green: The Memory Card transfer has ended normally or
a backlight error was detected immediately after the power was
turned ON.
Lit orange: Immediately after power is turned ON, indicates file
system check in progress, battery low, or disconnected and operat-
ing normally.
Flashing orange: Memory Card transfer in progress.
Lit red: Memory Card transfer has ended abnormally.
Model
Standard range
NSH5-SQR10B-V2
NSH5-SQG10B-V2
Number of light and dark pixels:
4 or fewer defects the size of 0.2 < (minor axis + major axis)
≤
0.55 mm (within 1 per 20 mm)
Summary of Contents for NSH5
