85
Appendix E
Removable Box Application Examples
Installing NSH5-AL001 Removable Boxes enables using the station status monitor address function to create
an application like the one described in this section.
In this section, actual examples are given for creating applications, including the required CX-Designer set-
tings. The communications address and set values used in the following descriptions are only examples. The
user must adjust these examples to suit their own actual application conditions.
1.
The screen that is displayed will change depending on the station number of the Removable Box connected
to the NSH5.
2.
The PLC is notified of the station number of the Removable Box attached to the NSH5. (The method for
clearing the station number sent to the PLC when the NSH5 is not connected is also described.)
Connecting a Single NSH5 PT
The following description is for connecting a single NSH5. Use the following steps to set up the system.
1.
Removable Box Setting
The station number for the Removable Box is set using the rotary switch. For setting details, refer to
4-2
Nomenclature and Functions
and Functions and
4-3 Switch Settings
.
2.
Station Status Monitor Address Settings
Use the following procedure to enter settings in the CX-Designer.
(1) Select
System Setting
from the CX-Designer's PT Menu.
(2) Click the
NS Handy Terminal
Tab in the System Setting Dialog Box.
(3) Enter
$W1000
in the Station Status Monitor Address Field
Screen 2
PLC
Station 1 screen
Station 2 screen
Station 8 screen
...
...
NSH5
DM00200 = 2
Screen 1
Screen 2
Screen 8
(2) The PLC is notified of the station number of the Removable Box
that is attached to the NSH5. As a result, the PLC's processing
can be changed depending on the Removable Box's station
number. Here, the station number is stored in DM00200.
(1) This screen will change depending on the station number of the
Removable Box that is connected to the NSH5.
Removable
Boxes
Station 1
Station 2
Station 3
Station 8
Summary of Contents for NSH5
