![background image](http://html1.mh-extra.com/html/omron/ns-series/ns-series_operation-manual_743542067.webp)
3-4
Displaying I/O Comments
3-4-2
Switching the I/O Comment Display
65
2. Select I/O Comment File Setting from the Various Settings Dialog Box.
3. Select the host where the I/O comment file is set.
4. Select from the list of I/O comment files the one that is to be displayed.
•
For each currently registered host in the
Host
area, the name of the I/O comment file
that is set will be displayed.
•
There are two types of I/O comment files: global (G-filename.IOC) and local
(L-filename.IOC). The file names are displayed in the I/O Comment File Setting Dialog
Box. Selecting a file name selects both the global and local I/O comment files.
•
I/O comment files read from the PLC are displayed as hostname.IOC. In addition, an
asterisk is displayed after the name in the
Host
area in the dialog box.
•
The names of I/O comment files saved on a Memory Card or in the PT are displayed in
the list appearing in the
I/O Comment File
area.
•
If I/O comment files are saved under the same name both on the Memory Card and in
the PT, the file in the PT will be read.
•
To delete an I/O comment file set for a host, select the file name in the
Host
area and
press the
Cancel
Button.
•
To delete an I/O comment file, select from the
I/O Comment File
list the file that is to be
deleted and then press the
Delete
Button.
5. Press
the
Set
Button.
6. Press
the
Close
Button.
For details on using the I/O Comment Extracting Tool, refer to the
I/O Comment
Extracting Tool Operation Manual
.
Note
Up to 100 I/O comment files can be displayed in the
I/O Comment File
list in the I/O
Comment File Setting Dialog Box.
3-4-2
Switching the I/O Comment Display
Press the
I/O Cmt
Button to switch the I/O comments display to three lines, one line, or
not at all.
3-4-3
Displaying the Entire I/O Comment
For basic instructions (LD, LD NOT, AND, AND NOT, OR, OR NOT, OUT, and OUT
Summary of Contents for ns series
