![background image](http://html1.mh-extra.com/html/omron/ns-series/ns-series_operation-manual_743542126.webp)
3-2
Extracting and Storing the File in the Memory Card
20
Step 4: Storing the I/O comment file in the Memory Card or PT.
●
Copying the I/O Comments File to the Memory Card
Store the extracted and converted I/O comment file in the
ldrdata
folder of the Memory
Card. (This procedure is given on the assumption that the
ldrmt
,
procon
, and
ldrdata
folders under the
ldrsetup
folder on the CD-ROM are already copied to the Memory
Card.)
Copy the I/O comment files (G-
@
.ioc and L-
@
.ioc) to the
ldrdata
folder on the Memory
Card.
Note
The converted and extracted I/O comment file must be stored in the
ldrdata
folder on
the Memory Card. If the file is not stored in the correct location, the error message
“Cannot open I/O Comment file” will be displayed when the Ladder Monitor is started
and the I/O comments will not be displayed.
●
Copying the I/O Comments File to the PT
With Version-1 NS-series PTs and NSJ PLCs with NS system version 6.6 or higher, the
I/O comment file stored in the PT can be read by the Ladder Monitor.
1) On the computer, copy the converted Ladder Monitor I/O comment file to the project
folder for the PT using Explorer or another application.
2) Connect the computer to the PT.
3) Transfer the Ladder Monitor I/O comment file to the PT using a transfer program or the
CX-Designer. (Refer to Transferring Data to the PT in the CX-Designer online help for
information on the transfer program and CX-Designer.)
Note
•
An I/O comment file stored in a Memory Card can also be read.
•
If an I/O comment file with the same name is stored in both the Memory Card and
the PT, the I/O comment file in the PT will be read.
•
With system version 6.5 or earlier, store the I/O comment file and Ladder Monitor
application in a Memory Card and place the Memory Card in the PT.
Summary of Contents for ns series
