Omron NB10W-TW01B, Operation Manual

Page: 79 / 548

3-37
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-3 NB
-Desig
n
er So
ftware Wind
o
w
3
3-3-2 Project F
ile Wind
o
w
The Project File Window is intended for displaying information about the PT, Macro, Recipe and Vector
Graphic, etc. contained in a project. If this project uses 1 PT, only one “HMI0.whe” will appear below the
[PT]. if 3 PTs are involved, “HMI0.whe, HMI1.whe, HMI2.whe” will appear accordingly. The rest can be
deducted from this. See the following diagram.
By clicking the “+” or “-” symbol on the left of the icon, the folder tree can be unfolded or folded.
By double-clicking a specific file, the editing state can be entered.
Note The recipe file (.RCP) can only be imported and deleted, but not be edited in the Edit Window.
Graphics
The Graphics mainly indicates this project contains how many Vector Graphics and bitmaps. If a new
Vector Graphics or bitmap is created in this project, it will show up immediately here. If a created Vector
Graphics or bitmap is double-clicked, the screen will be switched to the graphics edit window
immediately. For Vector Graphics and bitmaps, refer to
3-5-5 Vector Graphic (Page 3-58) and 3-5-6
Bitmap (Page 3-63) .
The Project Work Space is mainly intended for displaying the structure of the project, and contains two
parts: PT and PLC, as shown below.
3-3-2 Project File Window
3-3-3 Project Work Space