Omron NB10W-TW01B, Operation Manual

Page: 486 / 548

6 Descriptions of New Functions Added into NB -TW01B
6-4 NB-series Programmable Terminals NB-Designer Operation Manual(V106)
• Precautions for download through Ethernet and setting methods of IP address:
The IP address of PC and that of PT should locate in the same network segment with the first 3
parts being same and the last part not being overlapped. If the LAN is used, the IP address
can’t be modified to prevent the conflict with the other IP addresses in the network.
First, set the network IP address in the “Control Panel” for Windows to the same network
segment as that for PT Unit. The IP address of PT Unit can be checked from the PT in the
System Setting Mode (with the DIP switches SW1 and SW2 on the back side both set to ON).
Then, make various settings in the Project Option Setting dialog box:
In the NB-Designer, select “Ethernet” from the Download Device option in Project Option
Setting dialog box after clicking [Transmission Setting] option in the [Tools] menu, and
then set the IP address to be same as that of PT Unit. At that time, the project created in NB-
Designer can be downloaded into the PT.
Changing Network Setting of PT Unit:
After confirming the download function, set the IP option in the [PT] tab in the [PT Property]
dialog box to the IP address and others, and then download it into PT after Compile operation
is performed. At that time, the IP address of PT is same as that set in the project. (If download
through Ethernet is performed again, please specify the modified IP address and port number
in the Project Option Setting dialog box.)
• Setting IP address in System Setting Mode:
For more details of Setting IP address in System Setting Mode, refer to the NB Series Setup
Manual (SBSA-550).
• Setting IP address by using [Set IP Address/Port] in NBManager:
For more details of Setting IP address by using [Set IP Address/Port] in NBManager, refer to 6-
1-6 NBManager (Page 6-6) .
6-1-4 Download through Ethernet