Omron NB10W-TW01B, Operation Manual

Page: 185 / 548

3-143
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-6 P
a
rt
s
3
3-6-16
Indirect S
c
re
en
Indirect Screen can make an already created screen pop up on the current screen. Please
refer to [3-4-3 Screen Creation]. Generally, the screen called by the Indirect Screen is smaller than the
full screen (but it can also be of the same size as the full screen). In Indirect Screen specifications, pop-
up displays the screen of the screen No. supporting the stored value of the word address specified to
the [Read Address]. The number arranging indirect screens is not restricted in NB-Designer, but the
pop-up screens can be displayed simultaneously up to 16 screens at max.
Value 0 is used to close the screen, and value -1 means to make screen 0 pop up, while the values
other than 0 or -1 mean to make the corresponding screens pop up.
3-6-16 Indirect Screen
Command Button,
write address is
LW100, setting
mode is
"Set Constant"
Indirect screen,
read address is
LW100.
Press this button,
pop-up screen 20
screen 20
Press this button,
pop-up screen 21
screen 21