Omron NB10W-TW01B, Operation Manual

Page: 278 / 548

3 Functions of NB-Designer
3-236 NB-series Programmable Terminals NB-Designer Operation Manual(V106)
(6) Checking in [Use Text Library] check box in the [Label] tab of dialog box for each Property
allows using the text string which was registered to the [Text Library].
If you haven’t added the text to the Text Library, “Use Text Library” can’t be checked and is
always grayed out until you have added the text into the Text Library.
2
Multi-language Switching
The switching among the multiple languages can be realized by modifying the value of special
register system memory (LW9130). As long as the value of LW9130 is changed in any one of
screens, the displayed text will switch to the text (language) corresponding to the value being
changed to, and the language of the whole system will be changed regardless of the condition
of the current screen. Only resetting the value of LW9130 can make the language switched
again.
It is based on the system special memory LW9130 to realize the multi-language switching in
the Text Library.
That’s to say:
When LW9130 is 0, the contents corresponding to Language 1 in Text Library will be displayed;
When LW9130 is 1, the contents corresponding to Language 2 in Text Library will be displayed;
When LW9130 is 2, the contents corresponding to Language 3 in Text Library will be displayed;
and so on.
When LW9130 is 31, the contents corresponding to Language 32 in Text Library will be
displayed;
When LW9130 is greater than 31, the contents corresponding to Language 1 in Text Library will
be displayed.
Note “Number of Language” in [PT Property]-[PT Extended Properties] can restrict the number of Language(s)
displayed in Text Library. When the Text Library is used for the first time, the default “Number of
Language” is 8. Even if LW9130 is greater than 8, the system can only display the contents corresponding
to Language 1 to Language 8. If the languages to be displayed are greater than 8 [Max No. of Languages]
needs to be increased in [Language Setting] screen with [Number of Language] not exceeding [Max No.
of Languages].
“Default Language” in [PT Property]-[PT Extended Properties] refers to the language number to be
displayed in the default Text Library. For example: When Language 2 in the Text Library is English, if
“Default Language” is set to “2”, the text using the Text Library will be displayed as “English” on the
System Screen after PT is powered ON and be switched to another language until the value of LW9130 is
changed.