3 Functions of NB-Designer
3-132
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3
Switch to the [Scale] tab and make settings as shown below.
Color
This option is used to set the colors for the normal state, warning the upper or lower limit value,
border and background of the Level Meter.
Flash Over
Max
When the value of the specified memory exceeds the set Alarm Upper, the filled area of the
Level Meter flashes.
Flash Under
Min
When the value of the specified memory falls below the set Alarm Lower, the filled area of the
Level Meter flashes.
Minimum/
Maximum
Sets the upper and lower limit values of the display area for the Level Meter. The percentage of
filled area in the Level Meter can be derived from the following formula: Percentage of filled area
in the Level Meter = (Value read by the memory - [Minimum value])/([Maximum value] -
[Minimum value]) ×100%
Indirect
Max/Min
Reference
Sets the upper, lower limit values and offset value of the Level Meter display area to be read
from the specified memories.
Alarm Upper/
Alarm Lower
Sets the range of the alarm area. When the value of the specified memory falls below the Alarm
Lower or exceeds the Alarm Upper, the filled area will be displayed in the specified color.
Indirect Alarm
Over/Alarm
Upper Reference
Sets the upper and lower limit values of the alarm area in the Level Meter display area to be
read from the specified memories.
Detailed descriptions of the Level Meter Properties
100
80
50
20
0
100
80
50
20
0
100
80
50
20
0
D100=10
D100=40
D100=80
Summary of Contents for NB10W-TW01B
