Omron NB10W-TW01B, Operation Manual

Page: 137 / 548

3-95
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-6 P
a
rt
s
3
3-6-6 W
ord Switch
Functions of Word Switch:
For the control modes of Add and Sub, [Unloop] is not checked by default.
State No.: All 256 statuses can be set at maximum. (When BIN or BCD code and LSB code are used,
or when LSB code is used, the status of 256 (at maximum) and the status of 17 (at
maximum) will be displayed, respectively. Refer to
8 LSB Type (Page 3-363) in the section
3-16).
The line spacing for the list and the dropdown list can be set:
Map Value: When the value read by the read address is equal to a certain value in the Map Value, the
Word Switch component will display the label and the graphics corresponding to the state number of
this value. When a certain state number is switched to, the value corresponding to this value will be
written into the write address.
3
Switch to the [Label] tab and add the text corresponding to the state.
4
Switch to [Graphics] tab, and select Vector Graphics or bitmap to display the memory state and
represent the touching area.
5
Switch to the [Control Setting] tab and make the Security Setting and set the Triggering action.
Type Descriptions
Add Each time this component is pressed, 1 will be added to the state number, and the map
value of the corresponding state will be written into the specified write address, and the
graphics corresponding to the state will be displayed according to the specified read
address at the same time.
Unloop: When it is checked, and the value of the memory for write address is equal to the
value mapped by the set maximum state number, the component doesn’t act when
the switch is pressed again. When it isn’t checked and the value of the memory of
write address is equal to the value mapped by the set maximum state number, the
value of the memory for write address is equal to the value mapped by the
minimum state number.
Sub Each time this component is pressed, 1 will be subtracted from the state number, and the
map value of the corresponding state will be written into the specified write address, and
the graphics corresponding to the state will be displayed according to the specified read
address at the same time.
Unloop: When it is checked, and the value of the memory for write address is equal to the
value mapped by the minimum state number, the component doesn’t act when the
switch is pressed again. When it isn’t checked and the value of the memory of write
address is equal to the value mapped by the minimum state number, the value of
the memory for write address is equal to the value mapped by the set maximum
state number.
List All the set states will be displayed in the list form, and the current state is differentiated by
the specified color.
Dropdown List All the set states will be displayed in the dropdown list form, and the current state is
differentiated by the specified color and the first information displayed in the dropdown list
represents the current state.