![background image](http://html1.mh-extra.com/html/omron/k3hb/k3hb_technical-communications-users-manual_743344110.webp)
8-7
Message Communications Performance
Section 6-2
Com
m
uni
ca
tions
P
e
rfor
m
a
nce
Only Message
Communications
(Remote I/O
Communications
Stopped)
Communications cycle time = 2 (see note) + 0.11 x TB + 0.6 ms
TB depends on the baud range as follows:
500 KB/s: 2, 250 KB/s: 4, 125 KB/s: 8
Note
The communications cycle time when remote I/O communications are
stopped is 2 ms.
Message
Communications and
Remote I/O
Communications
Communications cycle time = (communications cycle time for only remote I/O
communic 0.11 x TB + 0.6 ms
TB depends on the baud range as follows:
500 KB/s: 2, 250 KB/s: 4, 125 KB/s: 8
Note
The above calculations for the message communications times are only for
use as guidelines. They do not produce maximum values. The message com-
munications time depends on the frequency of messages, the load on the
remote node, the communications cycle time, etc. If network traffic is concen-
trated on one Master Unit, long times will be required that those produced by
the above calculations. Be sure to consider this when designing the system.
Summary of Contents for K3HB
