Omron K3HB, Technical Communications User'S Manual

Page: 37 / 147

1-16
Commands and Responses (CompoWay/F Communications)
Section 1-9
Co
m
p
o
W
a
y
/F
C
o
m
m
u
n
icat
io
ns
Response
Response codes: The above indicates a normal end. For the response codes,
see
1-6 Writing to the Variable Area (page 1-10).
1-9-6 Setting Data Compound Write (CompoWay/F Communications)
Command
Multiple setting data items can be written by sending a single command. Up to
12 items can be written even if the addresses are not contiguous.
To specify the variable type or address, see SECTION 2 List of Settings
(page 2-1).
Setting data of setting area 1 is written in setting area 1. An error will result if
written in setting area 0.
To use this command, “Write via communications” must be enabled using the
“Write via communications” operation command.
Response
Response codes: The above indicates a normal end. For the response codes,
see
1-6 Writing to the Variable Area (page 1-10).
1-9-7 Monitor Value/Setting Data Compound Read Store (Write)
Command
This command is used to store the addresses of multiple monitor values or
setting data that you wish to read.
The stored monitor values or setting data can be read by sending a single
“Monitor value/setting data compound store read” command. Up to 20 items
can be stored, even if the addresses are not continuous.
"01" "02" "0000"
Response code
SRC MRC
Variable type Address Setting data (explanation)
“C1” to “C2” “0000” to “0004” Setting data of setting area 0
“C4” to “CB” “0000” to “0027” Setting data of setting area 1
"01" "13" "00"
Bit position
Address MRC SRC
Setting data
Data
"00"
Bit position
Address Variable type
Setting data
Data
Variable
type
"01" "13" "0000"
Response code SRC MRC
Variable type Address Setting data (explanation)
“C0” “0000” to “0004” Monitor values
“C1” to “C2” “0000” to “0004” Setting data of setting area 0
“C4” to “CB” “0000” to “0027” Setting data of setting area 1
"01" "11" "00"
Bit position
"00"
Bit position Read address
Read address
Read address MRC SRC
Variable
type
"00"
Bit position
Variable
type
Variable
type