5
Changing
the
System
Environment
FZ3 User's Manual
Setting the System Operation Environment
113
Item
Set value
[Factory default]
Description
Scene
Specify startup
scene, scene group
Checked
The selected scene/scene group will be the
scene/scene group at start-up.
[Unchecked]
The scene/scene group set in the controller
when "Data save" is executed will be the
scene/scene group at start-up.
Scene Group
Scene groups 0 to 31
[Scene group 0]
Selects the scene group displayed at
start-up.
Scene
Scenes 0 to 31
[Scene 0]
Selects the scene displayed at start-up.
Select startup mode
●
[ADJUST]
●
RUN
Selects whether the ADJUST window or
RUN window is displayed at start-up.
Measurement manager
bar state
●
[Open]
●
Close
Selects whether to display the measurement
manager bar at start-up.
Operation priority
Specifies whether measurement results
display or menu operation is to have priority.
[Measurement result
priority]
Measurement results display processing will
have priority over menu operation.Menu
operation will be harder to receive due to its
lowered priority status.
Menu operation priority
Menu operation is prioritized.Measurement
results display may be incomplete.
Measurement
initialization priority
Measurement initialization is performed
immediately after scene switching or flow
editing.Specifies whether measurement
trigger receipt or screen re-drawing
processing has priority during measurement
initialization.
[Measurement trigger
receipt priority]
Measurement trigger reception is prioritized
even during processing, including
measurement processing. Display for
screen re-drawing processing may be
incomplete due to its lowered priority status.
Processing of re-drawing
on screen priority
Screen re-drawing processing is prioritized.
Measurement triggers will not be received
until screen re-drawing processing is
complete.
Communication module
select
Acesst 1.0 6251194