3
Performing
Test
Measurement/Starting
Operation
72
Arranging the RUN Window
FZ3 User's Manual
List of Sub Image Numbers
Classification
Processing item
Sub image number and display
2D measurement
ECM Search
0: Measurement image
1: Measurement image displayed with matching edges
overlaid
Edge Position
0: Measurement image
1: Profile display
Edge Pitch
0: Measurement image
1: Profile display
Scan Edge Position
0: Measurement image
1: Scan region
Scan Edge Width
0: Measurement image
1: Scan region
Gravity and Area
0: Measurement image
1: Extracted image
Labeling
0: Measurement image
1: Extracted image
L
0: Measurement image
1: Color extraction image
Defect
0: Measurement image
1: Defect profile [when area measurement is present]
Precise Defect
0: Measurement image
1: Defect profile [when area measurement is present]
Fine Matching
0: Measurement image
1: Difference image display
Measurement Image Switching
0: Reset image
1: Measurement image
Position Compensation
0: After compensation
1: Before compensation
Trapezoidal Cor
0: Post-conversion image
Extract Color Filter
0: Color extraction image
1: Measurement image
Stripes Removal
0: Post-conversion image
Halation Cut+
0: Color extraction image
P
0: Post-combination image
Polar Transformation
0: Post-conversion image
1: Measurement image
Display Image File
0: Image 0
1: Image 1
2: Image 2
3: Image 3
Display Last NG Image
0: Last NG
1: Previous NG error image (Displayed when there are 2
or more saved images. Otherwise, "Last NG" is
displayed.)
2: NG error image from 2 previous (Displayed when
there are 3 or more saved images. Otherwise, "Last NG"
is displayed.)
3: NG error image from 3 previous (Displayed when
there are 4 or more saved images. Otherwise, "Last NG"
is displayed.)
Acesst 1.0 6251194
